PHONE HUNTING
+62 21 4502130

EMAIL ADDRESS
mtaho@marton.co.id

Drilling

mater-mine

Drilling Rigs

Face Master 1.4 – The mechanized drill rig for ultra low seams

The mechanized drill rig for ultra low seams is designed for drilling blastholes of diameters between 41 mm and 76 mm and of net length 3.2 m. The unit can be used in methane-free mineral underground workings. Design allows effective drilling of blastholes in underground workings of height up to 1.6m.

Face Master 1.7 – The mechanized drill rig for low seams

The mechanized drill rig for low seams is designed for drilling blastholes of diameters between 41 mm and 76 mm and of net length 3.2 m. The unit can be used in methane-free mineral workings. Design allows effective drilling of blastholes in workings of height up to 2.0 m.

Face Master 1.7L – New Generation mechanized drill rig for low seams with air-conditioned cabin

The rig features:

  • Hydraulically operated, ergonomic, “capsule” type operator’s cabin,
  • The cabin system as well as the front frame is certified for transmission of loads at kinematics 60kJ
  • Front operator’s window complies with P8B according to EN-356
  • The cabin is equipped with air conditioning, which works both during transportation and with mine’s power grid of 500V
  • The cabin is also equipped with particle filter
  • Additionally, hydrogen sulfide filter has been installed in the cabin in order to protect the operator against gas leaks, which often occur in KGHM’s headings,
  • Working unit has been based on an already proven design of B40HD boom and Montabert’s HC109 drill, equipped with water swivel with higher resistance to the aggressive flushing
  • In order to ensure excellent traction, the rig is equipped with main pivot with double rotation joint (vertical with horizontal oscillation).Thanks to this solution it is possible to obtain very good stability during

Face Master 2.3 – Twin Boom Drilling

The twin boom drilling rig is designed for drilling blastholes of diameters between 41 mm and 76 mm and of net length 3.8 m. The unit can be used in methane-free mineral workings. Design allows effective drilling of blastholes in workings of height from 2,5m up to 6.1 m.

  • The Face Master 2.3 is a twin boom face drilling mining rig with 50 m2 coverage and power shift four wheel drive transmission.
  • Direct controlled drilling system with anti-jamming, collaring, simple frequency functions and feed control to optimize the drilling parameters.
  • B 40 L booms with 1000 mm (40 in) extension directly controlled by two-axial joysticks, which enables accurate and fast positioning between holes.
  • F 7000 series aluminum feed with hollow stainless steel wear rails - simple design with low maintenance cost and long operation time.
  • Minimum tramming height 2.3 m with adjustable operator's seat. Total width of the machine is 1,99m, which is able to tram in minimum width of headings 4,0m @90 degrees.
  • Articulated carrier with four-wheel drive - excellent grade ability and fast tramming. Service and emergency / parking brakes are provided - SAHR system. Four jacks for stable set up.
  • Basic rig includes FOPS - approved operators canopy.

Face Master 2.8 CC – Twin Boom, computer controlled face drilling mining rig

  • The Face Master 2.8CC is a twin boom face drilling mining rig with 70 m2 coverage and power shift four wheel drive transmission.
  • Direct controlled drilling system with anti-jamming, collaring, simple frequency functions and feed control to optimise the drilling parameters.
  • As a option the machine is equipped with computer control system DBPL - providing to operator: Manual boom control, Drifter control,Dril log, Drilling pattern planning and recording.
  • B 40 L booms with 1500 mm (60 in) extension directly controlled by two-axial joysticks, which enables accurate and fast positioning between holes.
  • F 7000 series aluminium feed with hollow stainless steel wear rails - simple design with low maintenance cost and long operation time.
  • Minimum tramming height 2.8 m with adjustable operator's seat in environmental cabin.
  • Articulated carrier with four-wheel drive - excellent grade ability and fast tramming. Dynamic and static brakes. Four jacks for stable set up.
  • Basic rig includes FOPS - approved operators canopy.

Face Master 3.0 – Twin Boom Drill Jumbo with basket

  • Diesel powered articullated chassis with permanent 4-wheel drive.
  • Fail-safe, wet multi-disc service brakes with additional fail-safe emergency-parking brake.
  • Latest concept heavy duty alloy profile feeder with stainless steel guide surfaces. Designed to improve performance and reduce operation costs.
  • Hydraulic joystick steering with full proportional control. Shock protection is provided.
  • Minimum tramming height: 2.9 m.
  • B 40L head rotation boom with full automatic parallelism in both planes and the boom can also be used for cross-cutting.
  • Hydraulic steering ensures low operation costs and high performance.
  • Reliable hydraulic controls – ensuring low operating costs and high performance.

Face Master 2.5 NVDR – Narrow Vein Single Boom drilling Rig

  • Working unit with 2-axial rotary actuator for superior maneuverability
  • 360 degrees roll-over in both planes for safety replacement of drill bit from operator’s compartment
  • Proven design of central oscillation main pivot for excellent traction.
  • FOPS & ROPS certified operator’s protection canopy with lifting segment for better visibility during vertical drilling
  • Drilling coverage 25 m2 (5x5m)
  • Powerful hydrostatic tramming system to drive at 14 degrees angle
  • Dedicated automated main articulation lock for extra stability during drilling operations.

Face Master 2.3 – 1B – Single Boom Drilling Rig

The single boom drilling rig is designed for drilling blast holes of diameters between 41 mm and 76 mm and of net length 3.8 m. The unit can be used in methane-free mineral workings. Design allows effective drilling of blast holes in workings of height from 2,5m up to 6.1 m.

  • The Face Master 2.3-1B is a single boom face drilling mining rig with 43 m2 coverage and power shift four wheel drive transmission.
  • Direct controlled drilling system with anti-jamming, collaring, simple frequency functions and feed control to optimize the drilling parameters.
  • B 40 L boom with 1000 mm (40 in) extension directly controlled by two-axial joysticks, which enables accurate and fast positioning between holes.
  • F 7000 series aluminum feed with hollow stainless steel wear rails - simple design with low maintenance cost and long operation time.
  • Minimum tramming height 2.3 m with adjustable operator's seat. Total width of the machine is 1,99m, which is able to tram in minimum width of headings 4,0m @ 90 degrees.
  • Articulated carrier with four-wheel drive - excellent grade ability and fast tramming. Service and emergency / parking brakes are provided - SAHR system. Four jacks for stable set up.
  • Basic rig includes FOPS - approved operators canopy.