CompAir's long experience in providing portable air compressors around the world brings you the C85-14 to C140-9 models, designed and built to withstand punishing operation in construction, civil engineering and surface mining sites.

The C110-9 to C140-9 models provide respectively 11.3 and 13.3 m3/min of air at 8.6 bar for multi-tool construction site applications and also have 7, 12 and 14 bar derivative models. These meet the requirements of large scale blast cleaning of concrete or steel structures, building demolition and refurbishment, civil engineering activities such as rock bolting or ground stabilisation, and drilling activities in surface mining and geo-technical exploration.

Today, specialist contractors in many of these applications require precise standards of air quality in terms of oil and water content, which are met by provision of numerous options to increase the operational ability of the C110-9 to C140-9 machines.

Electric generator options can also be added for powering lighting for night time operations or ancillary electrical tools to further increase their utility to contractors and the hire companies who supply them.

Continuous investment in the latest computer aided design (CAD), powder paint plant, sophisticated manufacturing processes such as CNC rotor grinders, and rigorous implementation of ISO 9001 approved quality systems ensure you take delivery of a reliable, and durable product.

Features

Balanced Start-up
The unit has been equipped with a balanced start-up system i.e. when starting, the engine idles without air delivery. After a warming-up phase of approx. 60 sec. air delivery is started by pressing a button on the control panel.

Large Wing Doors
2 large and wide angle upwards opening side wing doors supported by gas struts as well as a front door offer easy access to the maintenance points, airend, engine and coolers.

Instrument Panel
Clear instrumentation as well as individual fault indications, battery pilot lamp and warming-up button. Robust relay switching system with plug-in relays in a closed circuit system protecting the whole unit. The instrument panel is protected against vandalism by a lockable sheet steel flap.

Outlet Valves
3 x 3/4" valves and 1 x 2" valve easily accessible, fitted at rear below the instrument panel.

24 Volt System
The unit has been provided with a 24 V electric system. This ensures sufficient power reserves in case of cold starts and a safe run-up ability.

Separate Air Filters for Engine and Compressor
Reliable and safe operation even in very dusty ambient air due to separate air suction filters with safety cartridges. Visual contamination indicators avoid unnessary filter cleaning, exchange and cost.

Fuel Tank
Made of transparent plastic the level can be seen immediately. 210 litres capacity, sufficient for nearly 9 hours full load or 15 hours intermittent operation. Large and easily accessible fuel filler with strainer facilitates refuelling. Drain plug for easy cleaning. Shut-down in case of lack of fuel with start interruption to protect the starter.

Large Fuel Filter with Water Separator and Manual Filling Pump
Increases operation reliability.

New Airend
CAD-systems with efficient design software, highly developed production processes in mechanical production (NC-/CNC-machines) and highly accurate 3-D test and inspection techniques are standard features of the rotor and housing manufacture. The CompAir profile embodies the state of rotary screw technology and represents optimal efficiency and durability.

Individually Bolted Canopy Panels
Ensure damage can be repaired quickly at low cost. Galvanised sheet metal, electrostatically powdered and baked at 180-200°C avoid corrosion.

Main Switch
An internal battery switch avoids unauthorised starting and vandalism.

Water-cooled Deutz Engines Range 2012 / 1013
Are economical, quiet and environmentally friendly and they comply with the strictest legal requirements.

Key Features

Models available with working pressures 7, 8.6, 12 or 14 bar.

Reliable, fuel efficient and modern water cooled Deutz diesel engines with low emissions.

Fuel tank capacity for continuous full load working of 8 hours.

High lift side doors and a front door and easily removable synthetic parts enable excellent maintenance access including cooler cleaning.

Auto-shutdown systems protect machine against:
- high compressors temperature
- high engine cooling water temperature
- low engine oil pressure
- lack of fuel: auto-shut-down plus start interruption
- low engine cooling water level
- defective generator resp. low voltage

Individually replaceable bolted canopy elements enable economical repair of accidental damage.

Canopy panels of galvanised steel, electrostatically hard powder coated and enamelled at 200°C for maximum protection from corrosion.

Off load, soft start protects the engine and extends working life. Robust jocky wheel allow easy positioning.